LEESON® Gear Motor, Parallel Shaft Continuous Duty, Series: PE350, 115/230 VAC, 4/2 A Full Load Amperage, 0.16 hp, 60 Hz Frequency, 1 ph, 113 rpm Maximum, 3/4 in Shaft Diameter, 1-5/8 in Shaft Length, Reversible Rotation, 68 in-lb Torque, 15:1 Gear Ratio, Permanent Split Capacitor Motor, Ball Bearing, 222 lb Overhung Load, Special Mounting, 40 deg C Ambient, Class F Insulation, Totally Enclosed Fan Cooled Enclosure, Die Cast Aluminum Housing Material, 13.32 in L x 5.57 in H Dimensions
- Rugged die cast aluminum gear housing for maximum gear and bearing support
- Precision machined gearing and hardened for maximum load capability
- All gearing designed and rated to AGMA class 9 standards and to withstand momentary shock overload of 200%
- Oversized output bearings for greater overhung load capacity and long life
- High carbon alloy output shaft provides maximum strength and rigidity
- All needle bearing journals are precision ground after heat treating to provide maximum fit and finish
- Heavy duty industrial oil seals keep lubricant in and dirt out
- Gears and bearings are splash lubricated with permanent, heavy duty gear oil
- Run capacitor supplied at no additional cost for single phase designs
- Overhung load capacities shown are at center of output shaft
- These gear motors are designed for mounting at any angle
- Sub-fractional horsepower AC motors
-
Catalog
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Leeson_9201100_Catalog.pdf
-
Instruction/Ins...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Rollway_3203ZZC3_Manual.pdf
-
Specification S...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Leeson_9600900_Specification_Sheet.pdf
-
Warranty Inform...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Leeson_9201100_Warranty.pdf
Standard/Approvals |
: |
AGMA Class 9|CSA Certified|UL Listed |